NETWORK TRACKING
During my internship period in SunEdison , I was given
several task to ensure my accountability and responsible in completing the task
given.The 1st task that was given to me is Network tracing around
Sunedison Ipoh Plant.I was placed under Networking department so that I can be
guided by IT system engineer and I were helped by Mr.Thawa frm Local helpdesk
who are incharge with vendors on fixing the network port and cables.
Eventhough I am a programming based
student ,It didn’t hestitate me to complete this task and leads me to learn
more on Network. Althoughi suffered at first in learning the network command
and the relationship between network port and switch but I managed to overcome
it with help of Google and Mr Thawa .
The first step I did was
,record the network port label and look for the connected pc or tool and its status
in switch.
1st
Noted the network port
label
exp : P4-61
exp : P4-61
2nd
Look out for the
connected tool/pc
Sample: P4-61 is
connected to FPOLA05
3rd
Look for the LAN cable
which was connected to a port with a network port label in switch to determine
the status that is connected / disconnected.
(blinging port shows tht network port is connected)
(blinging port shows tht network port is connected)
4th
Update the port in excel
sheet on the network port with information of location,switch & IP address,port,status,vlan,connect to &
etc
Exp:
Besides that ,I were asked to look for
empty switch ports along in the switch and update a excelsheet for it as it
will be helpful to trace for available port to add new network ports in
building whenever its needed.
1st
Check out for empty port
in switch at every department and note down the switch port.
2nd
Update the switch port
label in excelsheet with locationand switch ip.
0 comments:
Post a Comment